Description:
They are made of epoxy resin With Brass fitting.
The capacitive insulators are for indoor.
Use in environment with max temperature of 85°C.
These insulators, transmits signals to voltage phase indicator and are used as insulating supports for electrical equipment, bus bars, fuses & etc.
Reference Standards:
IEC 60660 – IEC 60273 -IEC60137
Installation:
Bus bar and MV equipment installation with three screws at the top of insulator.
insulator is installed with one screw on the plate.
Signal output screw below.
Technical data:
Rated operating voltage 36KV
Dry power frequency withstand Voltage 70 KV/1 min
Lighting impulse withstand voltage 170KV
PD 10pc>
Creepage distance 495mm
Insulator dimensions 300mm
Ceramic capacitor
Routine tests:
Test Rated operating voltage
Test Dry power frequency withstand Voltage
Test PD
